Description

N/A                N/A                  N/A 

Description:

1-SURPLUS NEVER USED CAMPRO USA CPV -1600B 3 AXIS CNC VMC 60 X 30 

  DATE OF MFG. NEW 2018/2019

  STK#103657

=================================================================

SPECIFICATIONS WHILE OBTAINED FROM SOURCES DEEMED 

RELIABLE ARE SUBJECT CHANGE WITHOUT NOTICE 

AND TO VERIFICATION BY BUYER: 

HIGH PERFORMANCE VERTICAL MACHINING CENTER

MACHINE FEATURES:

Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring 

  maximum rigidity and accuracy. 

Box ways on all 3 axes greatly upgrades stability and dampening capability. 

Automatic lubrication unit with intelligent pressure failure detection function provides reliable supply for saving cost and for environmental protection.    

Oil-coolant separation design which meets the environment protection requirements allows centralized collection for all way oil.

The CPV-1600B is designed for heavy cutting, long-term high accuracy, and superior surface finishes.  Classic manufacturing methods and ultra rigid construction are combined with advanced technological features to provide exceptional value.   Please note that features and specifications are subject to change and should be verified at the time of order.

STANDARD FEATURES:

* Fanuc Oi-MD Control (Package B)

* AI APC Contour Control

* 6,000 RPM Spindle (ZF Gearbox)

* Powerful 25 hp (30 min) high torque spindle motor

* CAT50 Big Plus Spindle

* 1000 PSI CTS Prep Only

* Spindle Air Blow

* Rigid tapping

* Custom Macro B (User Definable)

* Twin Arm 24 Tool ATC

* Tool Change Time (Tool To Tool) 3.5 sec.

* Tool Change Time (Chip to Chip) 7.0 sec.

* Portable Manual pulse generator

* Program and data protection key switch

* Massive One-piece Meehanite cast iron bed

* Chip Auger

* 4th Axis Prep (no amplifier)

* Low friction turcite mating way surfaces

* Double Anchored, Pre-tensioned ballscrews

* 590 IPM X & Y axis, 472 IPM Z axis Rapid Traverse Rate

* Full enclosure splash guard

* Flood coolant with large coolant tank

* Work light (2)

* Operator call lamp (red, yellow, green)

* Spindle load meter

* Assembly and operation tools

* Auto Power Off

* Heat exchanger for Electrical Cabinet

* Instruction manual, parts list, and electrical diagram

* Fanuc operator and maintenance manuals

* MACHINE WARRANTY:  ONE YEAR Parts only

* CONTROL WARRANTY: TWO YEARS: Parts and Labor

SPECIFICATIONS:

CAPACITY:

X axis travel 62.9" 

Y axis travel 32.7" 

Z axis travel 27.5" 

Table loading area 70.8" X 31.5"

Allowable table load 4,000 pounds

Table T Slots - width x slot spacing .708" x 4.9" x (5)

SPINDLE:

Spindle nose to table top 5.9" - 33.5"

Spindle Bearing Diameter 2.8"

Column to spindle center 33.5"

Spindle taper CAT 50 Big Plus

Spindle speed 6,000 RPM

A.C. spindle motor (30 min.) 25 HP 

Spindle torque (30 min) 390 ft-lbs.

Spindle Driving Method ZF Gearbox

AUTOMATIC TOOL CHANGER:

ATC Type Twin Arm Type

Number of Tools 24

Tool Shank CAT 50

Max. Tool Dia. 4.3" 

Max tool Diameter (No Adjacent Tool) 7.8"

Max. Tool Length 11.8"

Max. Tool Weight 33 lbs.

Tool Change Time TOOL - TOOL 3.5 sec

Tool Change Time CHIP - CHIP 7.0 sec

Tool Selection Random Bi-Directional

MOTION:

X and Y axis rapid traverse rate 590 IPM

Z axis rapid traverse rate 472 IPM

Cutting feed rate 393 IPM

Slide Type Box Ways

Least command increment .001mm, 

Positioning accuracy +/- .00020" (full stroke)

Repeatability +/- .00008"

GENERAL:

Floor Space Required (W x D X H / INCHES) 169 x 116 x 126

Machine Weight 30,864 lbs.

Standard Power Source Requirement - Fanuc 205-235 Volts / 3 Phase/60HZ

Power Capacity 78 AMPS

Air Source Requirement 85 - 115 PSI (3/8 ID Supply Hose)