Description

With fingers for box and pan type and optional radius forming to depth of up to 6"

Click to see video of this hydraulic metal bending machine

Click for our instructions how to make a box out of sheet metal.

STANDARD EQUIPMENT on each hydraulic powered metal bending brake machine:

Removable Nose Bar
Bolted Bottom Bar
Compact Hydraulic Power Unit
Angle Bar
Insert Bar
Oil Level Sight Gauge
Electric Foot Switch - Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material.
Bend Angle Dial Adjustment - Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends.
Material Thickness Dial Adjustment - Reference scale for speedier set up when adjusting clamping pressure.
Back Gauge - 25 1/2" travel, rack and pinion type with hand wheel adjustment on right side of machine. Inch/Cm scales. This back gauge will both measure and square up your metal..
Inch Control - Bending leaf up/down pushbuttons allow complete operator control of the bending leaf motion.
Automatic Cycle - Actuating the "Automatic Pushbutton" clamps the top leaf, raises the bending leaf to the preset bend angle dial adjustment setting, lowers the bending leaf, unclamps the top leaf.

OPTIONS AVAILABLE: 
1.Radius Nose Bars up to 1.5" radius (great for aluminum aircraft work) -see picture below.
2.Extension Fingers (to form rigid inside corners with a return flange across the top) -see below.
3.Open End Fingers (to form tubes of triangular, square, rectangular, or tapered shape) -see below.
4.Insert Bar - 1/4 inch (for closer offset bends)
5.Radius Formers - for forming gutters, mouldings, and prototypes from thin sheet metal.
6.Electronic push button operated Back Gauge with digital readout (see directly below).

Model
Number

Bending 
Length

CAPACITY

Motor
HP

Weight
Lbs.

Mild
Steel

Stainless
Steel

HBPU-612-6

72"

12
gauge
(.105")

16
gauge
(.06")

2

3300