Specifications for stock plate to be processed (entry side)
Length
minimum 49-1/4"
maximum 40 ft.
Width
minimum 31-1/2"
maximum 141-3/4"
Specifications of the finished part (exit side)
Length minimum 4"
Width minimum 4"
Drilling capacities
Vertical drill heads 1
Spindles per vertical drill head 1
Maximum hole diameter that can be drilled (milled) 1-9/16" (15-3/4")
Minimum plate thickness 1/4"
Maximum thickness that can be drilled 5"
Other specifications
Spindle motor power (at S3 rating) 35 HP*
Spindle rotation speed with continuous 250 - 6000 RPM adjustment from program
Maximum longitudinal transferring speed 66 FPM
Cross positioning speed 105 FPM
Passline height 25-1/2"
Features with thermal cutting options (mild steel)
Maximum thickness of the plate for HPR400XD:
- production cutting 2"
- with edge start cutting 3-1/8"
- with bevel cut at 45 - production cutting 1-1/2"
- with bevel cut at 45 - edge start cutting 2-1/4"
Monospindle Vertical Drill Head
One vertical drill head (positioned on the zero-reference side) with the
following specifications:
Spindle connection size ISO 40
Maximum hole size 1-9/16"
Maximum longitudinal dimension for milling operations on U axes 13-1/2"
Cross positioning 141.7"
Spindle motor power (at S3 rating) 35 HP*
Rotation speed (scribing) 250 - 6000 (7000) RPM
*42 HP based upon maximum power one minute peak.
The above drilling head is supplied with:
Feeding system is equipped with ball screw and servo motor controlled by CNC.
Drill internal coolant system pneumatically operated.
A telecamera with monitor to control the processing and tool changing Cross Slide (Y axis)
Cross positioning system with precision gear reduction, rack and pinion equipped with automatic clamping device, suitable to clamp the whole material width in order to process a 15-3/4" area without moving the mobile gantry.
Rack and pinion positioning system parallel to the principal moving axis to carry out milling
operations.
Tool Change System with 24 Positions for Drilling Unit
Tool change system for the drill having the following specifications:
Connection ISO 40
Tools stored in tool changer 24
The insertion, removal of the tool, as well as the tool selection is made automatically through the CNC program.
Plasma Cutting System with HPR400XD
Plasma cutting system for large plates consisting of the plasma torch installed on a special support which is connected to the drilling unit. The unit employs a HYPERTHERM 400XD unit (400 Amps) complete with cooling system and automatic torch height positioning.
This power source enables the processing of thicknesses up to 2" (maximum thickness with edge start: 3-1/8").
The system includes the automatic gas control panel for automatic regulation of gas flow rate. It also monitors the main cutting parameters which are displayed on the operators panel (gas: oxygen, air and nitrogen)
